Philips 200VW8FB service manual Safety approvals, Power management, Reliability of the monitor

200VW8 LCD

72

10.REGULATORY STANDARDS

Note: All certificates must be raised under the name of Philips

10.1Safety approvals

;CB report

;CE

;TUV GS

;TCO’03

10.2Power management

;Energy Star

10.3Certificates, Reports for the production start

When the first production of the monitor starts the following documents must be sent to Philips by mail. All reports must be raised under “Philips” and have to show W0ZR model name .

;CB report ;CE ;FCC

;Service manual

11RELIABILITY

11.1Reliability of the monitor

The MTBF of the monitor has to be greater than 50.000 hours. The MTBF shall be calculated according to the MIL Standard HBDK 217 E/F. The report about the calculation detail shall be provided on component level before mass- production by TVI. The calculation shall be performed for a primary test/preset mode under ambient temperature of 25°C.

12.CUSTOMIZATION

12.1Identity Customization Refer to SKU

12.2EAN /SAP Identification Refer to SKU

12.3Plastic

The plastic material of the monitor must be PC-ABS (Front/ back) ABS-HB (base). Plastic type and color is released as follows:

Refer to MakeUp sheet/ Graphic sheet

12.4Definition of serial number