Mechnical instructions
200VW8 LCD
13
1.Put down the monitor softly and take out the base from it.(note: care of the panel without scraped.)
4.Release 2pcs screws from bottom of rear cover, then take off the rear cover.
Fig. 1
2.Release 2pcs screws from rear cover, and release 2pcs screws from hinge cover too, then take off hinge cover.
Fig. 4
5. Release 3pcs screws from left side of bezel.
Fig. 2
3. Release 2pcs screws from stand and take off it stand.
Fig. 5
6. Release 3pcs screws from right side of bezel.
Fig. 3 | Fig. 6 |
