DEALER PREPARATION CHECK LIST
ESTATE SERIES ZERO TURN RIDER
BEFORE DELIVERING MACHINE — The following check list should be completed. Use the Operator’s Manual as a guide.
❒1. Engine has been serviced.
❒2. Battery fluid level is checked.
❒3. Low oil pressure warning light checked for operation.
❒4. Operator interlock switches checked for operation.
❒5. Assembly completed.
❒6. All fittings lubricated.
❒7. All shields in place and in good condition.
❒8. All fasteners torqued to specifications given in Torque Chart.
❒9. All decals in place and readable. (See decal page.)
❒10. Overall condition good (i.e. paint, welds)
❒11. Parking brake checked and adjusted, if necessary.
❒12. Steering checked and adjusted, if necessary.
❒13. Check tire pressure.
❒14. Operators manual has been delivered to owner and he has been instructed on the safe and proper use of the cutter.
Dealer’s Signature
Purchaser’s Signature
THIS CHECKLIST TO REMAIN IN OWNER’S MANUAL
It is the responsibility of the dealer to complete the procedures listed
above before delivery of this implement to the customer.
3
