OPERATION
Sickle Bar PRE-OPERATION Inspection
Mower ID#_______________________Make____________________________
Date:____________________________Shift ____________________________
Before conducting the inspection, make sure the tractor engine is off, all rotation has stopped and the tractor is in park with the parking brake engaged. Make sure the mower is resting on the ground or securely blocked up and all hydraulic pressure has been relieved.
Item | Condition at | Specific Comments if | |
Start of Shift | not O.K. | ||
| |||
|
|
| |
SICKLE BAR MOWER |
|
| |
The Operator’s Manual is in the Canister on the mower |
|
| |
All Safety Decals are in place and legible |
|
| |
The Mounting frame bolts are in place and tight |
|
| |
The Sickle bar connection bolts & pins are tight |
|
| |
There are no cracks in bar or frame |
|
| |
The Hydraulic Cylinders pins are tight |
|
| |
The Hydraulic Valve hose connections are tight |
|
| |
There are no leaking or damaged hoses |
|
| |
The Hydraulic Oil level is full |
|
| |
There is no evidence of Hydraulic leaks |
|
| |
The knives are not broken, chipped, cracked or bent |
|
| |
The clips, ledger plate & knives are properly adjusted |
|
| |
The Rock guards are in place and tight |
|
| |
The Hydraulic motor mounting bolts are tight |
|
| |
The Knife drive gearbox has been lubricated |
|
| |
The Knife wear plates have been lubricated |
|
| |
The Skid shoes are in good condition & tight |
|
| |
Operator’s Signature:________________________________________________________ | |||
DO NOT OPERATE an UNSAFE TRACTOR or MOWER
PT5 09/10 | Operation Section |
© 2010 Alamo Group Inc.
