ASSEMBLY
•Fit PTO shaft in position.
•Attach safety chains (A) on driveline to a convenient location to prevent rotation of the shaft guarding.
•Ensure the Lift Cylinder
•Operate the lift up controls and raise the dipper arm end just enough to clear the ground.
•Pivot out the dipper arm until the tension link can be connected.
Do Not attempt to raise or lower the boom or mower head unless the Implement is securely attached to the Tractor. The Implement could tip over and cause equipment damage and possible serious injury or death. Do Not use the boom controls to assist in installing the implement on the tractor. Raise or Lower the boom and mower head only while seated in the Tractor operator’s seat with the seat belt securely fastened. Inadvertent contact with the boom controls could allow a component to fall. A sudden or inadvertent fall by any of these components could cause serious injury or even death.
RMB 1660 11/10 | Assembly Section |
© 2010 Alamo Group Inc.
ASSEMBLY
