ASSEMBLY
OIL REQUIREMENTS
Tank
Fill reservoir to approximately 2” below the top of the tank. The capacity is approximately 180 liters (47.5 gallons). Do not overfill the tank.
Supplier | Cold or Temperature Climate | Hot Climate |
|
|
|
Castrol | Agricastrol hydraulic oil | |
|
| |
|
|
|
Shell | Tellus 46 | Tellus 68 |
|
|
|
Mobil | D.T.E. 25 | D.T.E. 26 |
|
|
|
Esso | Nuto “H” or “A” 46 | Nuto “H” or “A” 68 |
|
|
|
Texaco | Rando HD 46 | Rando D 68 |
|
|
|
Gulf | Hydrasil 46 | Hydrasil 68 |
|
|
|
B.P. | Energal HLP 46 | Energal HLP 68 |
|
|
|
Dalton | Silkolene Dove 46 or | Silkolene Dove 68 |
| Derwent 46 | or Derwent 68 |
|
|
|
Elf | Hydrelf 46 | Hydrelf 68 |
|
|
|
FITTING CONTROL UNIT IN CAB
Cable Controlled Models
The control unit is bolted to a mounting bracket.
This bracket may be bolted to the fender or cab bracket in a convenient location ensuring that no structural member of the cab or roll bar is drilled.
In deciding the final position of the control box remember not to exceed the minimum acceptable bend
The control lever for the cable operated rotor control valve is mounted in a similar fashion adopting the same precautions pertaining to drilling and cable runs.
RMB 1660 11/10 | Assembly Section |
© 2010 Alamo Group Inc.
ASSEMBLY
