The SETUP
Parameter | Settings | Description |
| (Bold=default) |
|
|
|
|
Interval | 10S (second) | Selects the length of time that the |
| default, | camera will “wait” until it responds |
| with a 60M | to any additional triggers from |
| (minute) to1S | the PIR after an animal is first |
| (second) range | detected and remains within the |
| of settings | sensor’s range. During this user |
| available. | set “ignore triggers” interval, the |
|
| camera will not capture photos/ |
| videos. This prevents the card | |
| in one minute | from filling up with too many |
| increments, | redundant images. Settings |
| begin with 10 second default | |
| in one second | when parameter is first selected. |
| increments) | Note: after setting down past “1S”, |
|
| settings start over at “60M”. |
|
|
|
Sensor Level | Normal, High, | Selects the sensitivity of the PIR |
| Low | sensor. The “High” setting will |
|
| make the camera more sensitive |
|
| to infrared (heat) and more |
|
| easily triggered by motion, and |
|
| the “Low” setting makes it less |
|
| sensitive to heat and motion. The |
|
| High setting can be useful when |
|
| the ambient temperature is warm |
|
| (making it more difficult for the |
|
| sensor to detect animals), and |
|
| the Low setting may help in cold |
|
| weather if the camera is being |
|
| triggered too often by anything |
|
| warmer than the surroundings. |
|
|
|
19