Advanced settings
Set transmission report output
This report can be printed after every transmission or only for errored transmissions. It provides information concerning the most important transmission data.
It is also possible to print part of the first document of the job in the transmission report.
2 x
PARAMETER NUMBER =_
Standby mode
Start the menu
Select submenu (2x)
Make your selection for the function number
Enter function number
ENTER
CONFIRMATION ERROR
ENTER
PARAMETER NUMBER =_
ENTER
FIRST PAGE IMAGE OFF
FIRST PAGE IMAGE ON ENTER
STOP
Confirm with ENTER
Current status
Change the status as follows
ON | Transmission reported printed |
| after every transmission |
OFF | Transmission report printed only |
| for errored transmissions |
Confirm with ENTER
Make your selection for the function number
Enter function number
Confirm with ENTER
Current setting
Change setting
Confirm with ENTER
Press STOP, return to standby mode
TF 610 TOSHIBA | Advanced settings | 59 GB |
