Toshiba TF 610 manual Setting dialling method, Set dial method Example Tone

Installation

Setting dialling method ✽

There are two dialling methods. The pulse-dialling method is normally used in the public switched telephone network. If your fax machine is connected to a PABX*, the DTMF dialling method may also be used. As the public network is modernised, this dialling method may also be used in the public network. If you are in any doubt, first try the pulse-dialling method (basic setting).

If the dialling procedure fails, try DTMP dialling. How ever DTMF is the most efficient.

✽) This function may not be available in machines in certain countries.

15-03 19:56 M 100%

PROGRAM SETUP DATA

2 x

PARAMETER NUMBER =_

ENTER

DIAL METHOD TONE

DIAL METHOD 10PPS

ENTER

STOP

Standby mode

Start the menu

Select submenu (2x)

Make your selection

Enter function number

Confirm with ENTER

Set dial method

Example: Tone

Page through the menu...

...until you reach the desired menu item Example: 10PPS

Confirm with ENTER

Press STOP, return to standy mode

GB 14 Installation TOSHIBA TF 610