Installation
Connection to PABX, obtaining a public line
The TF 610 can be connected not only to the public switched telephone network (public line) but also to a PABX. In this case, additional parameters have to be entered.
With PABXs, the public line is obtained in various ways:
• Number | Dial one digit (or several |
| digits) in order to obtain |
| the public line |
•Earth key | Earth potential is |
| connected to the voice |
| wire(s) in order to obtain |
| the public line |
• Flash key | With this method of |
| obtaining the public line, |
| the connection circuit is |
| interrupted briefly. |
When the method of obtaining a public line has been entered, you
must always press the key ”❊” before the actual number when you dial your fax partner. This is also applicable for saving the fax numbers (see page 43).
If you have problems if your machine is connected to an
extension, please read the “Comments concerning connection to PABXs” under “Further settings” (page 56).
PROGRAM SETUP DATA
2 x 
PARAMETER NUMBER =_
ENTER
ACCESS OFF
............
ENTER
STOP
Standby mode
Start the menu
Select submenu (2x)
Make your selection
Enter function number
Confirm with ENTER
Set public line
Page through the menu...
Public line Flash: Flash function
Public line Earth key: Earth key function
Public line Digit: Code (see next page)
...until you reach the desired menu item
Confirm with ENTER
Press STOP, return to standy mode
TF 610 TOSHIBA | Installation 15 GB |
