Preparation
Shake the process unit
several times side to side to ensure even
spread of toner...
... insert the process unit
First slide the green lock lever on the inside left of the machine to the back. The process unit is then inserted with its pins into the lateral guides and placed exactly in position by applying slight pressure downwards.
Now pull the lock lever forward again.
Then close the top cover and the control panel cover again.
Now (re)connect your fax machine to the socket.
A damaged drum will affect the copy quality. Therefore: Never touch the drum surface or expose the drum to sunlight.
To make a good impression:
a new toner cartridge
Open the top cover.
Don’t forget: First remove the mains plug from the socket.
After printing many pages, TONER NEAR EMPTY and later TONER EMPTY appear on the display. This means you must insert a new toner cartridge in your fax machine:
To replace toner:
Slide the green lock lever on the left side of the machine to the back and remove the process unit.
Place the process unit on a piece of paper on an even surface. Lightly tap on the toner cartridge to prevent any toner residue falling into the process unit. Pull the tape on the the toner cartridge upwards before you slide it out of ist holder.
First shake the new cartridge...
... then place on top of the process unit and slide it until it locks into place.
GB 6 | Preparation | TOSHIBA TF 610 |
