Advanced settings
Temporarily activate TX report
If output of the TX report is restricted with function 02 (see page 59), a general printout of the TX report can be requested for a set transmission job.
DOCUMENT SET TX REPORT
TX REPORT ON
ENTER TEL NUMBER
TEL: 12345
START
Load original
Remember:
Printed side face down
Document ready
Press TX report key
Preparation of TX report printout
Enter fax number
or enter alphabet dial or
Confirm with START
Document is transmitted, and TX report is then printed out
Remote maintenance (COMLINE)
Your fax machine permits remote diagnosis. This means that the internal settings can be read and changed via a telephone line. In order to ensure that data protection is assured, COMLINE is possible only after you enable your machine for this facility.
2 x
PARAMETER NUMBER =_
ENTER
RDC ACCEPTANCE OFF
RDC ACCEPTANCE ONE ENTER
STOP
Standby mode
Start the menu
Select submenu (2x)
Make your selection for the function number
Enter function number
Confirm with ENTER
Current setting
Change setting
Confirm with ENTER
Press STOP, return to standby mode
GB 60 Advanced settings | TOSHIBA TF 610 |
