Advanced settings
Power saver
The printing unit of your fax machine requires a heat source of approx. 170° Celsius to be able to print spontaneously. This heat source is heated at certain intervals in order to maintain the temperature at the required level. This consumes electricity, and the fan also has to run constantly. If you wish to save power or prevent the fan noise, you can switch off the constant heating facility. The heating would then only be activated when a fax is received. The delay involved before the fax document is printed out is approx. 1 minute.
2 x
PARAMETER NUMBER =_
Standby mode
Start the menu
Select submenu (2x)
Make your selection for the function number
Enter function number
ENTER
POWER SAVE | ON |
POWER SAVE | OFF |
ENTER |
|
STOP |
|
Confirm with ENTER
Current setting
Change setting
Confirm with ENTER
Press STOP, return to standby mode
TF 610 TOSHIBA |
| Advanced settings | 61 GB |
|
|
|
|
