Toshiba TF 610 Reception of documents, Set standby mode, Manual reception, Automatic reception

Reception of documents

Set standby mode	The standby mode is indicated with the AUTO	AUTO lamp on:
	LED. Press the AUTO key to change between	The following reception modes can be
If your fax machine is connected to the	two different reception modes (these are	alternatively set by individual setting of
	indicated by the AUTO LED):	function 38 (see page 52 et seq.):
PSTN or the PABX, there are four different
		•	Fax reception mode
ways of receiving documents.
		•	Telephone/fax mode
		•	Fax/TAD mode
		AUTO lamp off:
		Manual reception
Manual reception	If the line is used primarily for telephone traffic	The call must be accepted manually; the
		fax machine is not activated when the
		line rings. If you wish to transmit a
		document, you must press the START key
		of the fax machine.
			Ensure that any fax calls can
			indeed be accepted; it is always
			necessary to press the START
			key.

Press the AUTO key. LED “AUTO” off

Automatic reception

Key functions:

•Function 37

Number of rings before the fax machine picks up the call (1-10)

•Function 38

Setting of automatic reception

If the line is reserved exclusively for fax operation.

The fax machine switches over to reception as soon as the line rings (see page 25).

The fax machine is always activated, even if the call is initiated by a voice partner.

Press the AUTO key.

LED “AUTO” is lit

TF 610 TOSHIBA Reception of documents 19 GB