Installation
Enter the user name
The transmission header not only contains the terminal ID but also the user name. This can contain up to 20 characters. Each digit features several characters which can be activated by repeatedly pressing the corresponding key. If you have found a character of your choice, press the „P“ key to got to the next position. Use the „O“ key to got back one letter and make any corrections. Use the „0“ key to select special characters. If you enter too many characters, press the CANCEL key to delete the unwanted characters.
When the name is complete, press the
Example: TOSHIBA
PROGRAM SETUP DATA
LOCAL NAME
ENTER
NAME:
NAME: TOSHIBA
ENTER
STOP
Standby mode
Start the menu
Select submenu
Page through the menu...
...until you reach this menu item
Confirm with ENTER
Make your selection
Enter the name Example: TOSHIBA
1 x 8 = T # 3 x 4 = I # 3 x 6 = O # 2 x 2 = B # 4 x 7 = S # 1 x 2 = A 2 x 4 = H #
Name is complete
Confirm with ENTER
Press STOP, return to standy mode
TF 610 TOSHIBA | Installation | 13 GB |
