Transmit documents
Set resolution
In its basic setting, your fax machine uses high resolution for transmitting or copying your documents. You can however also adjust the resolution to suit the particular documents. Use the following as a rough guide:
STD | (basic setting) For |
| or typewritten documents |
FINE | For documents with small type |
| such as newspapers and |
| diagrams |
SF | For documents with very small |
| and detailed diagrams |
GREY | 64 grey stages for photographs |
| or colour documents |
| Higher resolution has an impact |
| on transmission time! |
To change the resolution, press the MODE key several times. The
LEDs above this key indicate the set mode:
LED lit | mode set |
|
|
FINE | fine resolution |
|
|
superfine resolution | |
|
|
GREY STAGE | |
|
|
all off | standard resolution |
|
|
Redial
If it was not possible for your fax message to be sent, this may be due to various reasons (please read page 65). One reason may be that the other fax machine is busy. In this case, it would make sense to call your partner again at a later time. This is done automatically by your fax; it attempts to send the fax message again approx. every three minutes.
The quantity of last number redial attempts and the relevant intervals between attempts can be set in the user functions (see page 52).
If you have established a connection via the MONITOR key, you can redial a number using the REDIAL/PAUSE key.
TF 610 TOSHIBA | Transmit documents | 35 GB |
