Parameter | Settings | Description |
| (Bold=default) |
|
|
|
|
Field Scan | On, Off | Turns Field Scan (Time Lapse) |
| (After On is | recording mode on/off. When acti- |
| selected): “A” | vated, Field Scan forces the camera |
| Start/Stop, “B” | to take photos or videos even when |
| Start/Stop, | it is not triggered by a nearby live |
| Interval | animal, useful for constant monitoring |
|
| of an area that might be far away |
|
| from the camera. The user can set |
|
| the start and stop times for up to two |
|
| independent “blocks” of Field Scan |
|
| recording, as well as the interval time |
|
| between each photo/video. To ensure |
|
| correct operation, avoid setting |
|
| overlapping start/stop times for Field |
|
| Scan A and B. Please read the “Field |
|
| Scan 2x…” section of this manual |
|
| (pgs |
|
| feature. NOTE: If the "Camera Mode" |
|
| parameter is set to "Day" or "Night" |
|
| operation only, that will take priority |
|
| over your Field Scan settings. Set |
|
| Camera Mode to "24HR" if you are |
|
| setting day and night Field Scan start |
|
| and/or stop times. |
|
|
|
Coordinate | Off, On | Allows the user to input latitude |
Input |
| and longitude coordinates for the |
| See "Using the | camera’s location. This data will |
| Setup Menu | be embedded in the files saved on |
| Input Screens" | the camera’s SD card (if “On” is |
|
| selected). This makes it possible |
|
| to see each camera’s location as a |
|
| “pushpin” on Google Earth maps |
|
| when reviewing a folder full of pho- |
|
| tos from multiple cameras, or use |
|
| other “geotag” capable software |
|
| (Picassa, etc). |
|
|
|
22
