LASER SAFETY ISSUES
The BUSHNELL HOLOsight is a Class II laser product. The Class II level illuminating beam, however, is completely blocked by the housing. The only laser light accessible to the eye is the image beam and is at a power level within the limit of a Class II laser product. The illuminating beam can become accessible to the eye if the housing is broken. Turn the sight off immediately and return the broken unit to the factory for repair.
FCC COMPLIANCE
The BUSHNELL HOLOsight complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
MAINTENANCE AND CARE
Your BUSHNELL HOLOsight is a precision instrument that deserves reasonably cautious care. The following tips are provided to ensure long lasting use of the sight.
1.The optical system and the window are coated with
Never clean the glass surface with a dry cloth or paper towel; always dampen the glass surfaces prior to cleaning.
2.All moving parts of the sight are permanently lubricated. Do not try to lubricate them.
3.No maintenance is needed on the sight’s surface, except to occasionally wipe off with a soft damp cloth. Use only a
4.Never disassemble the sight’s optical assembly. The optical cavity is purged, nitrogen filled, and sealed to achieve fog proof performance. Disassembly will void the warranty.
TWO-YEAR LIMITED WARRANTY
Your Bushnell® product is warranted to be free of defects in materials and workmanship for two years after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell Authorized Service Department.
Any return made under this warranty must be accompanied by the items listed below:
1)A check/money order in the amount of $10.00 to cover the cost of postage and handling
2)Name and address for product return
3)An explanation of the defect
4)Proof of Date Purchased
5)Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return postage prepaid to the address listed below:
IN U.S.A. SEND TO: | IN CANADA SEND TO: |
Bushnell Performance Optics | Bushnell Performance Optics |
Attn.: Repairs | Attn.: Repairs |
8500 Marshall Drive | 25A East Pearce Street, Unit 1 |
Lenexa, Kansas 66214 | Richmond Hill, Ontario L4B 2M9 |
For products purchased outside the United States or Canada please contact your local dealer for applicable warranty information. In Europe you may also contact Bushnell
at: BUSHNELL Performance Optics Gmbh European Service Centre
MORSESTRASSE 4 D- 50769 KÖLN GERMANY
Tél: +49 (0) 221 709 939 3
Fax: +49 (0) 221 709 939 8
This warranty gives you specific legal rights.
You may have other rights which vary from country to country. ©2003 Bushnell Performance Optics
6 |
| 7 |
