Bushnell 789971 Focusing The Telescope, Aligning The Finderscope, Battery Installation, Up Down

Detailed Assembly (continued)

FOCUSING THE TELESCOPE

1.After selecting the desired Eyepiece, aim Main Telescope Tube at a land-based target at least 200 yards away (e.g. A telephone pole or building). Fully extend focusing tube by turning Rack and Pinion Focusing Mechanism.

2.While looking through selected Eyepiece, slowly retract focusing tube by turning Rack and Pinion Focusing Mechanism until object comes into focus.

ALIGNING THE FINDERSCOPE

1.Look through Main Telescope Tube and establish a well-defined target. (see focusing telescope section).

2.Looking through finderscope, alternate tightening each Finderscope Adjustment Screw until center of finderscope is precisely centered on the same object already centered in main telescope tube’s field of view.

3.Now, objects located first with the Finderscope will also be centered in the field of view of the Main Telescope Tube.

BATTERY INSTALLATION

Your Sky Tour Handset is powered by 3 AA batteries (user supplied), installed with positive tip "up" on the middle battery, positive down on the two side batteries as shown below. The two white micro-switches under the middle battery allow you to select a language for the handset voice and display. For English, set both switches up (or both down). For Spanish, set the left switch up and the right switch down. For French, set the left switch down and the right switch up.

micro switches

Micro Switch PositIONS

	+
+	+	Up Down	Down Up
	Up Up
	ENGLISH	SPANISH	FRENCH

Your Illuminated Voyager Mount is powered by two CR1620 watch batteries (included). These batteries are installed by removing the battery cap located next to the illuminated dial power switches.

Never Look Directly At The Sun

With Your Telescope

Permanent Damage To Your Eyes

May Occur

8