Bushnell 960072C instruction manual

Models: 960072C

1 18
Download 18 pages 19.07 Kb
Page 15
Image 15

6.In the first few minutes of RF reception from the USB Transmitter, the Receiver may show data on only part of the screen-this is normal. The rest of the screen display data will gradually appear in the next 10 minutes or more. If you have waited 1 hour or more without seeing the rest of the weather data, shorten the distance between the Transmitter and Receiver, also check the Receiver’s battery condition. Then repeat the setup procedure in the TRANSMIT DATA FROM PC SOFTWARE TO THE RECEIVER section.

7.If the RF indicator is showing full strength ( ) but one or more of the next 3 days’ forecast is missing on the Receiver and HuntFXi program screen, your PC may be offline, or the internet connection was interrupted earlier. Connect your PC to the internet again to receive the latest forecast update.

8.If all forecast information appears except the UV Index, your PC may have been offline for more than 1 day. Connect your PC to the internet again to receive the latest UVI forecast update.

9.If the forecast reading of the HuntFXi software does not match with the Receiver, click “SEND TO RECEIVER” to re-transmit the signal again and wait for at least 10 minutes.

10.If your time on the HuntFXi software window and Receiver display is off by half an hour or more, click “SETTINGS” in the HuntFXi application and set the hour offset until the proper time is set.

11.If your city does not appear in the location list, select the one nearest to your home location.

12.Heavy internet traffic may slow down the response time of the weather data server temporary. Try again later if you wish to update the forecast manually by clicking “UPDATE” on the HuntFXi program screen.

For any other problems or questions, please contact Bushnell Customer Service at: (800) 423-3537 • www.bushnell.com

15

Page 15
Image 15
Bushnell 960072C instruction manual