C. Crane TRU9460 manual Using the DirectLink Feature

Using the DirectLink Feature

A pair of handsets (or two pairs of handsets at one time) can function as two-way radios. This fea- ture is called DirectLink and will not interfere with the base’s ability to make or receive telephone calls while in use. To activate, you must set both handsets to the DirectLink feature. While using this feature, these two handsets will not be able to make or receive normal phone calls until this operation is canceled; however, other handsets will function normally.

Note: If the party is out of range, NO SIGNAL appears in the display and the operation will be canceled.

) Press the MENU soft key. Select DIRECTLINK MODE menu.

2)Press the OK soft key. The display shows TO ENTER DIRECTLINK MODE PRESS . [ENTER].

3)Press the ENTER soft key. You will hear a confirmation tone, and DIRECTLINK MODE

COMPLETE appears in the display.

To enter DirectLink mode press [ENTER]

BACK DELETE ENTER

43