Answering an Intercom Page
When the intercom page tone sounds, the display will show the ID of the station that is paging.
) Press [ /flash], [int’com/hold], or the ANSWER soft key. Or press a number key, [
tone], or [#] (when Any Key Answer is enabled), or pick up the handset from the cradle (when AutoTalk is on).
2)To hang up an intercom page, press the END soft key or [
] on either handset.
Note:
Intercom
｢｢Handset #1
ANSWER
•If the party is busy, the handset returns to standby.
•If the party is out of range, UNAVAILABLE appears in the display and the operation will be canceled.
•If you receive an outside or intercom call or page while selecting the other handset, the operation is canceled.
•If you do not select a handset within 30 seconds, the operation will be canceled.
•If the party does not answer within one minute, the operation is canceled.
Room/Baby Monitor
This feature allows you to monitor sounds in another room. Place a handset in the room you wish to monitor; it will function as a micro- phone. Another handset can be set to function as a remote speaker, al- lowing you to monitor sounds in the room.
) Press the MENU soft key and enter the Room Monitor menu. TO WHICH UNIT? appears.
2) Select the handset you want to monitor by using [
] or [
].
45
