Matrix Switching System—Instruction Manual Page 9
Matrix System and Control System Connection - RS-232
PC RS-232, multi-Matrix (up to 32) connections are as shown below.
NOTES:
1. For RS-232 connections refer to photo below.
2. RS-232 or RS-485 baud rates: 9600bps, 8-bit data transmission address, no, odd,
or even parit y, 1-bit stop address: (9600 - 8 - N - 1).
3. Serial connection between Matrix RS-485 as follows:
TX (+) ↔ TX (+)
TX (-) ↔ TX (-)
RX (+) ↔ RX (+)
RX (-) ↔ RX (-)
4. DIP switch 1-5 addresses must not set to same ID address.
(
ID = 0
)
(
ID = 1
)
(
ID = 30
)
(
ID = 31
)