Remote Control
Installation
Transmitter
1.Plug the included AC adapter into a standard wall outlet.
2.Insert the adapter connector plug firmly into the DC IN jack located on the rear panel of the transmitter base.
3.Extend the retractable audio cable located on the back panel of the transmitter and connect it to the output jack of virtually any audio source.
Note : Do not fully extend the cable until ready to retract.
4.To retract the cable, pull it until it is fully extended and then allow it to feed back into the base.
Speaker Receiver
Battery Power
1.To operate the speaker using battery power, gently turn the speaker over and open the battery compartment cover located underneath.
2.Insert six (6) D alkaline batteries (not provided) into the battery compartment, observing proper +/- polarities as indicated.
3. Replace the battery compartment cover.
