AC Operation
1. To operate the speaker using AC power, plug the 9V power adapter into
a standard wall outlet
2. To insert the power adapter connector plugs firmly into the DC IN jacks
located underneath the speaker
Speaker Operation
1. To switch on the speaker, press the POWER button located on the front
panel of the speaker. A blue power LED on the speaker illuminates
2. To listen to a desired audio source through the speaker, switch on the
audio device that the transmitter base is connected to. The blue LED on
the transmitter illuminates steady
3. Depending on location, select CHANNEL 1 or 2 on the transmitter base
for optimal performance
4. To locate the strongest operating frequency, press the AUTO TUNE
button located on the front speaker panel. When the Auto Tune function
is engaged, frequency scanning begins automatically and stops when a
signal is detected.
5. You should experience interference-free speaker reception during
normal room to room operation. If interference or poor signal reception
occurs, press the AUTO TUNE button located on the speaker once (the
blue LED indicator illuminates) to locate the strongest operating
frequency.
6. If peak reception remains elusive, switch the CHANNEL setting (1 or 2)
on the transmitter base, then press the AUTO TUNE button on the
speaker to locate the corresponding frequency
7. “The BASS BOOST button can be used to enhance the bass sound
depending on your music preferences. Turn bass / boost effect ON
simply by pressing the button down on the speaker, and pressing it
once again to turn it OFF.“
8. To suit the needs of different users, you can mount the speaker inside
your bathroom