- Ensure the connected audio device is switched on and producing a signal.
- Ensure that the volume level is set to a moderate level
Distortion
- Ensure the speaker and transmitter are operating on the same frequency. If
not, press the AUTO TUNE button until both units are operating on the
same frequency
- Switch the CHANNEL selector position (1 or 2) on the transmitter base and
press the AUTO TUNE button the speaker until the matching frequency is
reached
- Speaker batteries may be too weak. Replace with new batteries or connect
with the AC/DC adapter (not supplied)
- Ensure that the volume level is set to a moderate level
- The audio signal input level is too low. Increase the volume level of the
audio source
Specifications
Transmission Mode: UHF mono
Carrier Frequency: 900MHz Digital Hybrid
Operation Voltage: Transmitter, DC 12V 200mA adapter
Speaker, 6 x AA batteries (not supplied) or DC 9V 500mA
adapter (included)
Frequency Response: 40Hz - 12KHz
Distortion: 1%
S/N Ratio: 70dB
Operating Distance: Up to 150 feet
Package includes:
Wireless shower speaker x 1
Audio transmitter x 1
AC/DC power adapters x 2
6.3mm to 3.5mm stereo adapter x 1
User manual x 1
ATTENTION:
The transmitter for this speaker set is designed to work with a wide
variety of devices. Our tests have shown the default volume levels of
iPods, MP3 players and other devices connected to the transmitter