Cabletron Systems 250 ACCESSING QUICK START

To access Quick Start, you will first configure your PC to obtain an IP

address automatically and then install the Quick Start program. The

following step-by-step instructions will get you started quickly.

Note:The following configuration instructions also apply to

Windows 98 and NT 4.0.

This section assumes that you have already:

✔connected the cables.

✔powered the router on.

ACCESSING QUICK START

Contents

Main CONTENTS Page INTRODUCTION The SmartSwitch Router 250 Cabletron Quick Start Page Page Page HARDWARE INSTALLATION Instructions to Install the SmartSwitch Router 250 Hardware: Page ACCESSING QUICK START Configure your Windows 95 PC for TCP/IP 10 Install Cabletron DSL Tools on your PC Access Quick Start Page ROUTER CONFIGURATION Configuration Instructions Page 16 5. Options 17 6. Tools Page Page Page Page Page APPENDIX B. HARDWARE REFERENCE SmartSwitch Router 250 Hardware Specifications Page Front Panel Rear Panel Connections Port Descriptions Console Port Pin Signal Name Part 15 CLASS B Statement APPENDIX C. FEDERAL COMMUNICATIONS COMMISSION (FCC) Approvals CONTACTING CABLETRON TECHNICAL SUPPORT