17

•Choose a PVC
The Quick Start application defaults the VPI/VCI numbers
to 0 and 38 respectively, unless they have been
preconfigured. Your Network Service Provider may have
decided on different values to use. If the value chosen by
your NSP is not the default value, then enter the VPI/VCI
that you have been given.
•SNMP Options
The Community Name and UDP Port Number may be
changed for security reasons or to allow SN MP monitoring
of a device located on the LAN while running NAT.
Consult with your Network Administrator to determine if
you need to change the default settings.

6. Tools

The following tools are available to perform advanced configura-
tions, file system management, software maintenance, and data
traffic monitoring.
•Terminal Window
The Terminal Window lets you access the Command Line
Interface directly from Quick Start w ith a customized
terminal emulator.