Switch Settings, Upgrades, and Installations B-1
B

Switch Settings, Upgrades, and Installations

This appendix covers the following items:
•Setting the mode switches (SectionB.1)
•Installing the DRAM SIMM (SectionB.2)
•Location for installing HSIMs or VHSIMs (SectionB.3)

B.1 SETTING THE MODE SWITCHES

These switches are set at the factory and do not need to be changed unless you intend to perform
the following:
•Force download a new image file from a BootP server.
•Clear NVRAM and restore all user-entered parameters, such as the IP address and Subnet
Masks, to the SmartSwitch “Default” configuration settin gs.
•Clear user-entered passwords stored in NVRAM and restore the default passwords.
Figure B-1 shows the location of the mode switches and the switch settings for normal operation.
!
CAUTION
You need an antistatic wrist strap (provided with 6C105 chassis) to perform the
procedures in this appendix. Use the antistatic wrist strap when performing any of the
procedures in this appendix to minimize ESD damage to the devices involved.
!
CAUTION
Read the appropriate sections to be fully aware of the consequences when changing
switch settings.
Only qualified personnel should change switch settings.