Using LANVIEW
Table 4-1 LANVIEW LEDs (Continued)
LED | Color | State | Recommended Action |
|
|
|
|
TX | Off | Port enabled, and no |
|
| activity. Should flash green |
|
| every two seconds |
|
| indicating BPDUs being |
|
| sent if STA is enabled and |
|
| there is a valid link. |
1.Ensure that the STA is enabled and that there is valid link. describes how to enable the STA.
2.Contact Cabletron Systems.
| Green | Flashing. Indicates activity. | None. |
|
| Rate indicates data rate. |
|
|
|
|
|
| Amber | Blinking. Port in standby. | 1. Ensure that the port is not disabled. |
|
| Port may be disabled due to | Refer to your Local Management |
|
| User’s Guide for information on | |
|
| Spanning Tree. | |
|
| enabling/disabling ports. | |
|
|
| |
|
|
| 2. Contact Cabletron Systems. |
|
|
|
|
| Red | Flashing. Indicates | None, unless there is a high rate of |
|
| collision rate. | activity. If so, check for network |
|
|
| configuration problems or a defective |
|
|
| device. |
|
|
|
|
|
| Solid. Diagnostic Failure. | Contact Cabletron Systems. |
|
|
|
|