Cabletron Systems 7H02-06 =

Introduction

1-5

The front panel connections are standard Cabletron FEPIMs.

Currently, the 7H02-06 supports the following two FEPIMs:

• FE-100TX (see Figure 1-2). The FE-100TX allows Fast Ethernet

connectivity using Category 5 Twisted Pair (UTP) cabling with

one RJ45 connector.

Figure 1-2. FE-100TX PIM.

• FE-100FX (see Figure 1-3). The FE-100FX allows Fast Ethernet

connectivity using multi-mode ﬁber optic cabling with SC

connector.

Figure 1-3. FE-100FX PIM.

Refer to Appendix A of this manual for the speciﬁcations for these

FEPIMs.

The 7H02-06 Module has one backplane connection and ﬁve front

panel RJ45 connections and one FEPIM connection. The backplane

connection provides power to the 7H02-06 Module and a channel

for communication with the 7X00 SmartSwitch Control Module.

The six front panel ports provide Category 5 Twisted Pair (UTP)

and/or multimode ﬁber optic connectivity.

100

FE-100FXSP