Cabletron Systems 9000 manual Switch Function Description

Installation

!

CAUTION

2-4

Table 2-1. Function of DIP Switch

Switch	Function	Description
		When toggled, this switch clears user-entered
8	Clear	passwords stored in NVRAM, and restores the
	Password 1	default passwords. Once the passwords are reset,
		you can use the defaults or enter new passwords.
		The module uses NVRAM to store user- entered
		parameters such as IP addresses, device name, etc.
	Clear	To reset these parameters to the factory defaults,
7		toggle this switch. Once reset, you can use the
	NVRAM 2
		defaults or enter new parameters, which are stored
		in NVRAM when the module is powered down, and
		remain there until the switch is toggled again.
		Toggling this switch, after pulling the board out of
		the SmartSwitch 9000, clears download information
6	Force BootP	from NVRAM. It also forces image Þles to be
	Download	downloaded from the station connected to the EPIM
		on the Environmental Module, which is conÞgured
		to act as that moduleÕs BOOTP server.
5	Reserved	For Factory Use Only
4	Reserved	For Factory Use Only
3	Reserved	For Factory Use Only
2	Reserved	For Factory Use Only
1	Reserved	For Factory Use Only

1Do not toggle Switch 8 unless you intend to reset the user-entered passwords to the factory default settings.

2Do not toggle Switch 7 unless you intend to reset the user parameters to the factory default settings.