44 ELS100-24TXG User Interface ELS100-24TXG
Port Configuration Menu

The Port Configuration Menu allows you to configure port settings for a

specific port. Select c from the Port Menu to view the Port Configuration

Menu. Figure 3-18 shows the Port Configuration Menu and the

accompanying table describes the Port Configuration Menu.

Figure 3-18. Port Configuration Menu

PORTS 1-5 CONFIGURATION Access Control: READ/WRITE
a Port Name
b. Port Enable Yes
c. Flow Control Enable No
d. Auto-negotiation Enable No
e. Full Duplex Yes
f. Port Speed 100
x. Previous Menu
Enter Selection:
Selection Description
Port Name Allows you to assign an administrative name to the port
(1-14 character range).
Port Enable Allows you to enable (Yes) or disable (No) the port(s).
Flow Control Enable Allows you to enable (Yes) or disable (No) flow control on the
port(s).
Auto-negotiation
Enable Allows you to enable (Yes) or disable (No) the aut o-negotiat ion
mode for the port(s). This parameter does not appear for the
Gigabit Ethernet ports.
For 10/100 ports, if Auto-negotiation Enable is set to "No", the
Full Duplex and Port Speed fields display and are eligible for
configuration. For Gigabit Ethernet ports, if Auto-negotiation
Enable is set to "No", the Flow Control Enable field dis plays and
is eligible for configuration.
For 10/100 ports, if Auto-negotiation Enable i s set t o "Yes ", the
Full Duplex and Port Speed fields disappear and the system
automatically manages these functions. For Gigabit Ethernet
ports, if Auto-negotiation Enable is set to "Yes", the Flow Con-
trol Enable field disappears and the system automatically man-
ages this function.
Full Duplex Allows you to enable (Yes) or disable (No) the full duplex mode
for the port(s). This parameter cannot be changed for Gigabit
Ethernet ports which always operate in full duplex mode.
Port Speed Allows you to set the operational speed for the port(s). For 10/
100 ports, this parameter can be set to either 10 or 100. This
parameter cannot be changed for Gigabit Ethernet ports and is
always set at 1000, corresponding to 1000Mbps.