9032785 Configuring & Monitoring the Switch 63
To configure Class of Service, do the following:
1. Select Class of Service Configuration Menu from the Switch
Configuration Menu.
2. Turn the global switch Class of Service operation on or off by toggling
the Class of Service Enable option by pressing a.
3. Select Priority Threshold and type a number between 0 and 7.
4. Select Configure Port Priority.
The Port Priority Menu displays. From this menu, individual port pri-
ority levels can be configured.
Confi
g
urin
g
Port Operation
You can configure switch ports for operational parameters such as auto-
negotiation, duplex mode, port speed and flow control. The fiber ports
always operate in full duplex mode and 100Mbps speed. Therefore, these
two parameters, along with auto-negotiation, are not configurable on fiber
ports.
To configure port operation, do the following:
1. Select Port Menu from the Main Menu.
2. Select Configure and enter an individual port number or mult iple port
numbers. Press [Enter].
The port number(s) entered displays on the top of the Port Configu-
ration screen.
3. Select Port Name and enter a Port Name. Press [Enter].
4. Select Port Enable to toggle between enabling (Yes) and disabling
(No) the port(s).
5. Select Flow Control Enable to toggle between enabling (Yes) or
disabling (No) flow control on the port(s).
6. Select Auto-negotiation Enable to toggle between enabling (Yes) or
disabling (No) auto-negotiation on the port.
Examples: You can configure an individual port or
multiple ports, separated by commas or hyphens, in ei-
ther:
a list: ports 1, 3, 5, 7
a range: ports 6-9
or a combination of both: 1, 3, 5, 7, 10-15, 21, 23