![](/images/new-backgrounds/1190715/19071563x1.webp)
INSTALLATION
NOTE: Be sure each cable is securely attached to its port and that the slide latch on the AUI connector is secured to the lock posts on the AUI port. See Figure
To strain relief the cables for a
1.Remove protective paper from one of the cable mounts and attach the mount to the wall 3 inches from the
2.Repeat step 1 placing the other cable mount four inches from the AUI port.
3.Strain relief each cable to its respective cable mount by using the tie wraps.
To strain relief the cables for a
1.If possible, use long tie wraps to secure the
2.Using additional long tie wraps, strain relief each cable to the same structural item.
The
Page 3 - 10