Cabletron Systems user manual Chapter Installing the FOT-F3, Installation, Unpacking the FOT-F3

INSTALLATION

CHAPTER 3

INSTALLING THE FOT-F3

This chapter contains instructions for unpacking your Cabletron Systems’ FOT-F3 Transceiver, connecting the FOT-F3 to an Ethernet device and the network, installing cable supports, and mounting the transceiver (if necessary). Verify that all requirements listed in Chapter 2, Installation Requirements/Specifications, are met before installing the transceiver.

3.1 UNPACKING THE FOT-F3

Before you install the FOT-F3, you should visually inspect the transceiver and check the contents of the accessory package. To unpack the transceiver:

1.Carefully remove the transceiver from the shipping box. Save the shipping box and materials in the event the transceiver has to be reshipped.

2.Remove the transceiver from its protective plastic bag and set the transceiver aside.

3.Remove the accessory package from the box. It should contain:

Page 3 - 1