INSTALLING THE SEH
SEH USER’S GUIDE 3-5
3.2.4 Rack Mounting the SEH
Refer to Figure 3-4 and perform these steps to install the SEH in a 19-inch
rack.
1. Locate the four 8-32 x 1/4" screws and the two rackmount brackets in
the accessory kit (see Figure 3-2).
2. Using the four 8-32 x 1/4" screws provided in the accessory kit, attach
the rack mounting brackets to the bottom of the SEH as shown in
Figure 3-4.
Figure 3-4. Installing the Rack Mount Brackets
3. With the mounting brackets installed, position the SEH between the
vertical frame members of the 19-inch rack and fasten it securely with
mounting screws as shown in Figure 3-5.
Do not use screws other than the four 8-32 x 1/4" screws
included with the SEH accessory kit. Use of longer screws
may damage the unit or cause electrical shock.
Screws (4)
Rack Mounting
Brackets (2)
HubSTACK
10BASE-T HUB
WITH
LANVIEW®
SEH-24
1491_04
SEH Book Page 5 Tuesday, March 19, 1996 4:12 PM