CONNECTING THE SEH TO THE NETWORK
SEH USER’S GUIDE 4-7
3. If the Internal Termination switch is in the OFF position:
a. Attach a BNC tee-connector to the BNC port on the module.
b. Attach the thin-net segment to one of the female connectors on the
tee-connector.
c. Attach another thin-coax segment or a terminator to the other
female connector on the tee-connector.
Figure 4-4. The EPIM-C
Terminate each segment attached to the tee-connector. If a
segment is not attached to one of the female connections on
the tee-connector, place a terminator on that connection.
NOTE