Cabletron Systems STH-24 manual Introduction, Features

Models: STH-24

1 32
Download 32 pages 16.14 Kb
Page 9
Image 9

Chapter 1

Introduction

The 9T122-24 MicroLAN™ Switch Module, shown in Figure 1-1, is a three port Token Ring bridge and router module. This module supports either one token ring with 24 HUB connections, or two separate Token Rings with 12 HUB connections, and an interface to the FNB backplane.

Features

Processor

The 9T122-24 is equipped with an advanced Intel i960 microprocessor. This microprocessor provides a platform for all management functions within a scalable RISC-based architecture.

System Management

Interfaces to the two System Management Buses (SMB-1 and SMB-10) for intermodule management.

Connectivity

The 9T122-24 provides 24 RJ-45 Trunk Coupling Unit (TCU) lobe connectors. The connectors may be configured as one 24-port ring (default) or two 12-port rings.

Bridging/Routing

Bridging/Routing between the front panel Token Ring connections and/or to any other module in the chassis via FNB-1 or FNB-2 of the FNB bus. The module is capable of Transparent Bridging or Source Route Bridging. IEEE 802.1d Spanning Tree Protocol is supported in all bridging functions. Translational bridging between Source Routing and Transparent Frames types is also performed.

1-1

Page 9
Image 9
Cabletron Systems STH-24 manual Introduction, Features