Savannah Rectangle Gazebo Assembly
Step 3: Roof Panel Installation
It is strongly recommended that you use a ladder for the final steps of the gazebo assembly.
1.Each roof section (4 total) must be set on top of the wall panel assembly and secured. When complete, tie in each roof section to the next roof section with drywall screws (Figures A, B and C).
2.Use 2”x4” splice to reinforce the underside of the roof sections. Secure using drywall screws (Figure D).
2007 Woodcrest Series Gazebo Owner’s Manual | Page 9 |
LTR20071040, Rev. A
