Assembly
Whether you assemble your surround package yourself or hire someone to do it, your new surround package needs to be assembled in a specific order. Our Cal Enclosures professionals have determined through their experience that this is the easiest way to assemble your surround package.
Tools and Materials
Utility knife | 25’ tape measure | Cordless drill |
100’ extension cord | Electric drill | |
1/8” pilot hole drill bit | 9/16” socket | |
Sandpaper (various grades) | Redwood stain | Wood putty |
Gray wash stain | Rags | 1/2” ratchet and impact drill |
1/2” carbide drill bit (masonry bit) |
|
|
Step Assembly |
|
|
Two Tier, 30” Step
1.Stand the legs up at 30” apart. Place the upper step on top of the upper section of the step.
2.To attach the step, screw in 4 screws (2 at each rear corner): 1 into the step leg and 1 into the step itself.
3.Place the lower step on the lower section of the step.
4.To attach the step, screw in 4 screws (2 on each on the outside of the step). Use the
1 Assembly
2009 Spa Surrounds | www.calspas.com |
LTR20091033, Rev. A |