Getting Started
The LED display will be in red (for standby mode) when the ‘Power’ button is pushed. Pushing the LED will cause the LED to be green indicating the unit is fully powered up.
•Depressing the ‘Tape’ button will cause the LCD display to show ‘Tape’.
•Depressing the ‘AM/FM’ button will cause the LCD display to show ‘AM’ or ‘FM’.
•Depressing the ‘CD’ button will cause the LCD display to show ‘Disc’.
Electronic Volume Control DisplayDigital Volume Control | VOL 26 |
|
| VOLUME |
•The volume control is preset to automatically turn on at volume level “26” upon power up. Press ‘VOL q’ to reduce the volume, the level will be shown in the LCD panel. Minimum volume will show ‘00’ on the LCD display.
•Press ‘VOL p’ to increase the volume. The maximum volume is ‘40’ on the LCD display.
Treble and Bass Controls | Treble |
‘TREBLEp’ and ‘TREBLE q’ can be used to adjust the Treble up and down respectively, | TRE+2 |
while ‘BASS p’ and ‘BASS q’ can be used to adjust the Bass up and down respectively. |
|
Both Treble and Bass can be adjusted in the range of +5 to | Bass |
|
PLL Radio Function
•Press ‘AM/FM’ to select the desired reception band. Extend the telescoping antenna for FM. There is a
•Press the ‘TUNER p’ or ‘TUNER q’ button repeatedly until the desired station shows on the LCD display.
•To automatically scan through the frequency bands, hold the ‘TUNER’ button down until you see the speed of the LCD display increase. Scanning will stop when a strong signal is detected.
BA+1
AM Band SelectionAM 520 KHzVi s i t u s o n l i n e a t c alifone . com
5