Califone 2455AV-02 owner manual 405, R01, PR02, Repeat Playing, Other Features and Functions

•To Pause press the ‘PLAY/PAUSE’ button while the disc is playing, the playing time will flash. Pressing the ‘PLAY/PAUSE’ button again will start the disc again from where it paused.

•To select a track to play press the ‘SKIP FORWARD >>’ or ‘SKIP BACK <<’ button either from ‘Stop’ or ‘Pause’. Each press will change the track number by one.

If the CD is playing, pushing and holding the ‘SKIP >>’ button will advance through the current track until it is over, then proceed to advance through the next track as long as the button is held down. Conversely, pushing and holding the ‘SKIP <<’ button will scan in the reverse direction through the track currently playing and continue through previous tracks as long as the button is held down.

• To stop playing the disc, press the ‘STOP’ button.

REPEAT PLAYING

• To repeat one track, press the ‘REPEAT’ button one time either while playing or in pause.

One Track Repeat (Flashing)

Repeat Track

4:05 5

•To replay all tracks, press the ‘REPEAT’ button a second time either while playing or in pause.

•A third press of the ‘REPEAT’ button will cancel the repeat command.

MEMORY PROGRAMMING. Up to 20 tracks can be programmed.

With the CD stopped press the ‘PROGRAM’ button one time. Select a track to play by pushing the ‘Skip Forward’ >>❘or ‘Skip Back’ ❘<< button. Push the ‘PROGRAM’ button again to enter another track to save in memory. When finished, press the ‘PLAY/PAUSE’ button to start the program. Pressing ‘STOP’ at any time exits the Program function. Note: When the CD door is opened all programming is cleared.

Program Input Mode		Choose Track 4
Memory	Track	Memory	Track
PR:01	— —	PR:01	04

Program Input Complete

MemoryTrack

PR:02 — —

Random Play Function

Pressing the ‘RANDOM’ button during CD play or stop condition will engage random play. Pressing again will cancel the function. Note: If the CD has memory programmed, the random function cannot operate until the program is cleared.

Play Time Mode

Pressing the ‘PLAY TIME’ button changes the time format on the LCD from elapsed time of each track to the total time remaining on the CD.

Dual Cassette Operation

The 2455AV-02 features dual cassette decks for playback, continuous playback (Deck 2 to Deck 1) and recording from tape, radio, microphone or CD on Deck 1 only.

Loading a Tape

To load a cassette tape, press the ‘STOP/EJECT’ button on Deck 1 or on Deck 2 to open the cassette door. Insert tape with playing side label facing you. Close the cassette door to lock the tape in position. Note: While Deck 1 is in playback mode, Deck 2 must be stopped and not in ‘PLAY’ or ‘PAUSE’ mode for Deck 1 to playback.

Tape Playback

To play a loaded cassette tape:

1.Set ‘FUNCTION’ button to ‘TAPE’

2.Press ‘PLAY’ Deck 1 or 2.

3.Adjust ‘VOLUME’.

4.Adjust ‘TREBLE’ and ‘BASS’ controls.

To Stop Playback

Press the ‘STOP/EJECT’ key.

To Pause Playback

Press the ‘PAUSE’ key all the way down to lock. To resume play, press the ‘PAUSE’ key again, and release.

To Fast Wind/Rewind

Press the ‘REWIND’ or ‘FAST-FORWARD’ key. Press the ‘STOP/EJECT’ key to stop winding at the desired position.

During fast winding, regular play, or recording, the tape will stop automatically when its end is reached.

OTHER FEATURES AND FUNCTIONS

Headphone Jacks. Six jacks are provided. One 3.5 mm jack on top and five 1/4” phone jacks on the rear of the cabinet.

Extension Speaker Jacks. Optional stereo extension speakers (SP-2400 Blaster Buddies) can be plugged into the 1/4" L (left) and R (right) speaker jacks on the rear of the cabinet.

8 9