Getting Started
The LED display will be in red (for standby mode) when the ‘Power’ button is pushed. Pushing the LED will cause the LED to be green indicating the unit is fully powered up.
•Depressing the ‘Tape’ button will cause the LCD display to show ‘Tape’.
•Depressing the ‘AM/FM’ button will cause the LCD display to show ‘AM’ or ‘FM’.
•Depressing the ‘CD’ button will cause the LCD display to show ‘Disc’.
Electronic Volume Control Display
Digital Volume Control
VOL 26
Programming Stations
20 FM stations and 10 AM stations can be saved in memory with the ‘PRESET’ function.
• Select a station to be saved in memory and press the ‘PROGRAM’ button to see ‘_ _’ appear on the LCD display.
Memory Display
___ ___
TUNER
AM 520
•Press ‘PRESET’ key to choose the desired channel (e.g. channel 1) then press ‘PROGRAM’ again to save.
Choose Channel 1
•The volume control is preset to automatically turn on at volume level “26” upon power up. Press ‘VOL q’ to reduce the volume, the level will be shown in the LCD panel. Minimum volume will show ‘00’ on the LCD display.
•Press ‘VOL p’ to increase the volume. The maximum volume is ‘40’ on the LCD display.
Treble and Bass Controls
TREBLE combined with Volume +/- can be used to adjust the Treble up and down, while BASS combined with Volume +/- can be used to adjust the Bass up and down respectively. Both Treble and Bass can be adjusted in the range of +5 to
Treble
TREB+1
Bass
TUNER | 01 KHz | |
AM | ||
520 |
•Select another station and press ‘PROGRAM’ again, then press ‘PRESET’ to select channel 2. Press ‘PROGRAM’ again to save. Press the ‘PRESET’ button to access preset stations until the desired channel is found.
CD Function
The
MP3 CDs
With MP3 Cds, the
a MP3 bit range of 32k to 320k, and is compatible with MPEG Audio 1, 2, and 2.5. The MP3 sampling rate is: | |
• | MPEG1 - Layer 2/3 (32kHz, 44.1 kHz, 48 kHz) |
PLL Radio Function
•Press ‘AM/FM’ to select the desired reception band. Extend the telescoping antenna for FM. There is a
•Press the ‘TUNER p’ or ‘TUNER q’ button repeatedly until the desired station shows on the LCD display.
•To automatically scan through the frequency bands, hold the ‘TUNER’ button down until you see the speed of the LCD display increase. Scanning will stop when a strong signal is detected.
BASS+2
AM Band Selection
TUNER
KHz
AM 520
• | MPEG2 - Layer 2/3 | (16kHz, 22.05 kHz, 24 kHz) |
• | MPEG3 - Layer 2/3 | (8 kHz, 11.025 kHz, 12 kHz) |
Before opening the CD door, the LCD will show dashed lines. Open the CD door and the LCD display will show ‘Open’. Insert a CD
and push door closed and the LCD will display the number of tracks and total play time of the disc. |
| ||||
Reading Disc TOC |
| After Reading TOC | After Reading TOC | ||
_ _ _ _ _ _ _ | TRACK |
| TRACK |
| |
11 | 74:59 | A23 | T167 | ||
| |||||
|
| Audio CD |
| MP3 CD |
• Press the ‘PLAY/PAUSE’ button to play the CD and the LCD display will show track 1 and the elapsed playing time.
| Searching Track 1 |
| Playing Track 1 |
TRACK |
| TRACK |
|
1 | 02:20 | 1 | 02:20 |
Note: When playing a CD, the LCD display will show : Track 11 74:59
When playing a MP3 disc, the LCD display will show: Track A99 T256
Vi s i t u s o n l i n e a t c alifone . com
Vi s i t u s o n l i n e a t c alifone . com
5 | 6 |