9 10
OTHER FEATURES AND FUNCTIONS
Headphone Jacks
Six jacks are provided. One 3.5 mm jack on top and ve 1/4” phone jacks on the rear of the cabinet.
Extension Speaker Jacks
Optional stereo extension speakers (SP-2400 Blaster Buddies) can be plugged into the 1/4” L (left) and R (right) speaker jacks on the
rear of the cabinet.
NOTE: THE INTERNAL SPEAKERS ARE DISABLED WHEN EXTENSION SPEAKERS ARE PLUGGED IN
Microphone Jack
To record using a dynamic microphone, plug into the 3.5 mm jack (29) on the rear of the cabinet. A 2.5 mm jack is also provided
for use with Califone model 4805AV microphone with remote Start/Stop.
Remote Sensor A sensor is built into the 2455AV-03 for use with the RC-2455 remote control.
RC-2455 Remote Control
• The RC 2455 operates most functions available on the boombox controls. It does not, however, function with some
of the tape operations.
MUTE Mute is another feature added to the remote. It works with tape, AM/FM and CD functions.
ENTER This button conrms the input.
Other Notes
- The ‘SCAN/SKIP’ buttons are the same as the ‘Tuner p’, ‘Skip forward uu|’ and ‘Tuner q’, ‘Skip back |tt’ buttons on the boom-
box.
- The ‘REPEAT’ button is the same as the ‘PRESET/REPEAT’ button on the boombox.
- The ‘TIME’ button is the same as the ‘PLAY TIME’ button on the boombox.
Continuous Play (Deck 1 to Deck 2)
1. Set the ‘FUNCTION’ selector to ‘TAPE’.
2. Load prerecorded cassettes into Deck 1 and Deck 2.
3. Press the ‘PLAY’ button on Deck 2.
4. Press the ‘PAUSE’ and ‘PLAY’ buttons on Deck 1.
5. Adjust the ‘VOLUME’ and ‘TONE’ controls.
6. When the tape in Deck 2 reaches its end, it will automatically stop and the tape in Deck 1 will begin playing automatically.
To Record from Microphone, Tape, Radio or CD
This unit has an ALC (Automatic Level Control) circuit and no further adjustment of the Volume control is necessary while
recording. Set the ‘FUNCTION’ Selector to: ‘TAPE’ to record from microphone. Plug mic into AM/FM jack to record from radio
or into CD jack to record from CD.
1. Insert a blank tape into cassette Deck 1.
2. Press the ‘PAUSE’ button then the ‘RECORD’ button on Deck 1 to prepare for recording. As the ‘RECORD’ button is pressed
the ‘PLAY’ button will follow.
3. Press ‘PAUSE’ again to start recording.
Dubbing (Recording from Tape 2 to Tape 1)
1. Insert a blank tape into cassette Deck 1, and the source or prerecorded tape into Deck 2.
2. Press the ‘PAUSE’ button then the ‘RECORD’ button on Deck 1 to prepare for recording. As the
‘RECORD’ key is pressed the ‘PLAY’ button will follow.
3. Press the ‘PLAY’ button on Deck 2, the ‘PAUSE’ button on Deck 1
will release automatically and recording will begin.
Note: Every new cassette tape has erase prevention tabs.
Commercially prerecorded tapes have the tabs removed to
prevent recording over the original material or accidental
erasure. Cover the openings with adhesive tape if you wish
to record over such cassette tape.
To Stop Recording Press the ‘STOP/EJECT’ button on Deck 2 or press the ‘PAUSE’ key on Deck 1 to momentarily stop recording.
Cueing with the Tape 1 Counter
Rewind the tape to the beginning. Press the ‘RESET’ button to reset the counter to (000). Use the Tape 1 Counter Display to note
precise points on an audio tape during playback and to cue the tape to those precise points using the ‘FAST FORWARD’, ‘CUE’,
or ‘REWIND/REVIEW’ buttons.
Compact Disc Player Operation
The 2455AV-03 Programmable Compact Disc Player plays both 12cm and 8cm CDs, CD-R, CD-RW without
requiring an adapter. Up to 20 tracks can be programmed for play.
Loading a Compact Disc
1. Lift to open the CD door and see “OPEN” on
the LCD display.
2. Place a CD in compartment with label side up.
3. Press the CD door down to close.
4. “CLOSE” will show on the LCD display.
To pause a playing CD
Press the ‘PLAY/PAUSE’ button again. The playing time will ash on the display. Press ‘PLAY/PAUSE’ again to resume play.
Compact Disc Play
To play a loaded CD:
1. Turn power ON.
2. Set the ‘FUNCTION’ Selector to CD.
3. The LCD will show the number of tracks and playing time.
4. Press the ‘PLAY/PAUSE’ button.
The CD Display will show the current track and playing
time.
2455AV-03 User Manual - CK 2010.03.22.indd 12-13 3/22/2010 9:55:24 AM