Califone DVD-110 owner manual Audio Connection, Stereo output, Coaxial output, Optic fiber output

Getting Started

Audio Connection

There are two kinds of audio output: analog audio output and digital output. The analog audio output has two tracks of stereo sound after DTS decoding, Dolby AC-3 and 2.1 sound track video. Digital video has optic fiber output and coaxial output. The best audio is found by usually using digital audio output, followed by analog audio output.

Stereo output

Connect a pair of RCA cables (red on the right, white on the left) to the audio out of the player, and to the stereo audio in of TV or stereo power amplifier.

Coaxial output

Connect special coaxial digital audio out jack of the player, and to coaxial audio out jack of the power amplifier (with coaxial digital input).

Optic fiber output

Connect special optic fiber cable to optic fiber digital audio out of the player, and to the power amplifier (with optic fiber cable digital input).

Notice:

•The selection of the connection of audio frequency depends on other neighboring appliance configurations. With a TV you can only choose stereo output.

• Power amplifier with either coaxial or optic fiber inputs allow you to enjoy the hi-fi effects of DTS and MPEG-II formats.

•Each connection should be in accordance with the configuration of the player. Refer to the karaoke and system setting instructions in this manual.

•Consult the instruction manual of the unit you want to connect the DVD110 to. Make sure to first turn the

power off of both units.

• The output of DVDs have a wide dynamic range, so the volume of the power amplifier should be moderate, otherwise the loudspeaker may be damaged by sudden loud noises.

•When using the player, turn off the power amplifier before switching the power on or off of the player, otherwise the loudspeakers can be damaged.

Vi s i t u s o n l i n e a t califone . com

9