Cambridge Audio 350C Remote control, iPod compatibility, Standby/On, Open/Close, Track select

Remote control

The 350C is supplied with an Azur Navigator remote control that operates both this CD player and Cambridge Audio Azur range amplifiers. Insert the supplied AAA batteries to activate. Always use alkaline-type batteries.

Standby/On

Switches the 350C between On and low power eco- friendly Standby mode.

Open/Close

Opens and closes the disc tray.

Numerical track select

Press the number of the desired track. The track will then play automatically from the start of the track.

Track select

To select a track number greater than nine, press -/-- followed by the track number. Playback of the chosen track starts automatically.

Play/ Stop/ Pause

Press the relevant button to play, stop or pause the CD.

Skip

Right Skip Press to skip forward by one track on the CD.

Left Skip Press to skip backward by one track on the CD.

Scan

Press and hold to scan within the selected track. Hold down for seven seconds to increase scan speed. Press the right button to fast forward, the left button to rewind.

Info

Used with CDs that support CD-text. In stop mode, press to toggle between album name and total time on the display. During playback, press to toggle between track name and track time.

Bright

Alters the brightness of the display backlight. There are three levels of brightness: Bright, Dim and Off.

, , ,

Read the ‘Operating Instructions’ section of this manual for information on the functions of these buttons.

Note: these buttons will function only when the display backlight is in either ‘Bright’ or ‘Dim’ modes. If it is set to ‘Off’, the functions do not respond.

Please note that the following buttons will only operate a matching Cambridge Audio Azur amplifier:

Mute

Mutes the audio on the amplifier. The mute mode is indicated by the source and speaker LEDs flashing. Press again to cancel mute.

Note: The speaker outputs, Pre-out and headphone outputs will all be muted. The Record outputs are unaffected.

azur 350C

Volume controls

Increases or decreases the volume of the amplifier output.

, , , , ,

The six source select buttons are used to directly select the input source to the amplifier.

Note: the Tape Monitor input works in a slightly different way – please refer to your amplifier user’s manual for details.

iPod compatibility

The Azur 350AC Navigator remote control can control the basic functions of Apple iPods when mounted in Cambridge Audio iPod dock or Apple’s Universal Dock. Refer to your dock’s instruction manual on how to connect it to your amplifier.

To use the Azur remote to control the docked iPod, hold down the ‘Aux’MP3 button whilst pressing one of the following buttons:

Play/Pause

Press to play the iPod, press again to pause play.

Skip

Press once to skip forwards or backwards one track.

Release the ‘Aux’MP3 button to return the remote control to normal functionality.

iPod is a trademark of Apple Inc., registered in the U.S. and other countries.

ENGLISH

7