Operating instructions
Loading and unloading discs
1.Press the Open/Close button.
2.When the disc tray has opened fully, place a disc carefully in the tray with the label side facing up.
3.To close the disc tray, press the Open/Close button again. When the tray, with a correctly loaded disc, is fully closed the CD player will read the disc and display the content information.
4.The disc tray can be opened at any time by pressing the Open/Close button. Only remove the disc after the tray has fully opened.
Note:
–Do not put anything except a compact disc into the tray. Foreign objects may damage the mechanism.
–Do not force the tray by hand during the opening and closing operations.
–To avoid dirt and dust entering the mechanism, keep the disc tray closed.
–If the compact disc is badly scratched or too dirty, the player may not be able to read it or play it.
–Never load more than one disc into the disc tray at any time.
Normal disc play
This unit has been designed to play compact discs,
recordable CDs 
the identification logo shown here. No other discs can be used. Any
of Contents) information so that they can be played back. This unit can play only the discs recorded in the
1.Switch on your amplifier and set its input selector to the correct position. Adjust the volume control to a minimum.
2.Press the Open/Close button to open the disc tray and load a disc.
3.Press the Open/Close button again to close the tray. The CD player will read the disc.
4.To begin playback, press Play.
5.When the last track has finished playing, the display will return to Table of Contents (TOC).
6.To stop the disc at any point, press the Stop button. Pressing the Pause button while the disc is playing will pause the disc and illuminate the pause icon on the display. Playback can be resumed by pressing Play again.
Locating a specific track during playback
1.A single short press of the Skip/Scan > button will take you to the beginning of the next track on the CD. Repeat as necessary.
2.A single short press of the Skip/Scan < button will take you to the beginning of the previous track.
Locating a specific track when playback is stopped
1.A single short press of the Skip/Scan > button will skip between tracks.
2.Press and hold to scroll rapidly through tracks.
3.Press Play to start playback from the selected track.
Repeating discs and tracks
1.Ensure that the disc is loaded.
2.Press the Repeat button on the remote control. ‘Repeat All’ will appear on the display. Press Play. The whole disc will now be repeated until the function is turned off.
3.To repeat a specific track, press Repeat twice while the track is playing. ‘Repeat Track’ will appear on the display. Press Play and the selected track will now repeat until the function is turned off.
Alternatively, press Repeat twice, select the chosen track using the numerical buttons on the remote control and press Play.
4.Press Repeat again either before or during playback to turn off the repeat function.
Note:
–‘Repeat Track’ is not available in Program mode.
–Selecting ‘Repeat Track’ when ‘Random’ mode has been selected will automatically cancel ‘Random’ mode.
Playing tracks in random order
1.Ensure that a disc is loaded.
2.Press the Random button on the remote control. ‘Random’ will appear on the display.
3.Press Play. The CD player will now play the entire disc in random order.
It is also possible to press the Random button during playback to listen to tracks in random order.
4.Press Random to exit the Random function. The disc will continue playing to the end in the correct order.
5.Press the Stop button at any time to stop the disc.
Note: Selecting ‘Random’ mode when ‘Repeat Track’ has been selected will automatically cancel ‘Repeat Track’ mode.
Using the Remain function
1.Ensure that the disc is playing.
2.Press the Remain button on the remote control once to display the time remaining for the track playing.
3. Press Remain a second time to show the total remaining disc time.
4.Press Remain again either before or during playback to return to normal play mode.
8
