Front panel controls
6
1 | 2 | 3 | 4 | 5 | 7 | 8 | 9 | 10 | 11 |
1Standby/On
Switches the unit between a low power standby mode (indicated by dim power LED) and on (indicated by bright power LED). Standby is a low power mode where the power consumption is less than 3 Watts. The unit may be left in standby mode when not in use.
3Phones
Allows for the connection of stereo headphones with a 3.5mm jack plug. Headphones with an impedance of between 32 and 600 ohms are recommended.
Note: Plugging in headphones will automatically mute the loudspeaker output.
2Infrared sensor
Receive IR commands from the supplied remote control. A clear unobstructed line of sight between the remote control and the sensor is required.
4Source
Press to cycle through the available input sources such as TUNER, MP3, CD, DVD and AUX inputs.
10
