Connecting and using a SIRIUS Connect Home Tuner (US version only)
The Sonata AR30 can be used in conjunction with a compatible SIRIUS receiver module such as the SIRIUS Connect Home Tuner
Please carefully read the instructions included with your particular tuner, paying attention to antenna configuration.
Note: The supplied AC power adaptor should be used, since the unit cannot power the SIRIUS tuner module.
Ensure your Sonata AR30 is powered Off using the switch on the rear panel. Connect the SIRIUS module using the supplied DIN cable. Connect the AC power supply to the Home Tuner, and confirm that the LED indicator is on.
Power on your Sonata AR30 from the rear panel.
Subscribing to SIRIUS services
First, make a note of your Home Tuner’s identification number (SID). This number may be obtained by selecting SIRIUS mode, and holding down the Info button on the front of the unit. The SID may also be found an a label located on the Home Tuner module.
To activate your subscription, please call
Alternatively, visit www.sirius.com and click Activate. Follow the instructions to register your module.
Positioning the antenna
The antenna must be positioned in such a way that the tuner can receive the best possible signal from the transmission satellite. The direction of the antenna depends on your geographical location in the United States.
Location | Antenna Direction |
Northwestern US or western Canada | East |
Midwestern US or central Canada | Directly above |
Northeastern US or eastern Canada | West |
Southwestern US | |
South central US | North |
Southeastern US | Northwest |
The LED indicator on the receiver module will turn green when you have sufficient signal strength.
AR30
DR30
ENGLISH
Manual Tuning |
|
In this mode, you can navigate through all subscribed stations using the | buttons |
on the front of the unit and remote control. |
|
1. Press the Source button until SIRIUS is displayed. |
|
2. Use the buttons on either the remote control or front of the unit to browse through available stations. If the station you wish to listen to is not present, you may need to add it to your subscription. Call
3.To store a station as a preset, hold down the Select/Mode button on the front of the unit, or the Select button on your remote control.
4.You may rapidly step through the subscribed and available channels by holding
down either the or buttons on the front of the unit and remote control.
Direct Tuning
You can tune directly to a channel of your choice by briefly pressing the Select button on the remote control. The display will show 'CHAN
Category Tuning |
|
This allows you to browse and select a category using the | buttons on the remote |
control. |
|
1.Press Select/Store button on the front of the unit. When the display reads 'CAT MODE', you are successfully in category tuning Mode.
2. | Browse through the available categories by using the | buttons. | |
3. | Press the | buttons to browse through the available stations within the chosen | |
| category. If the station you wish to listen to isn’t present, you may need to add it to | ||
| your subscription. Call | ||
4. | If you wish to exit category mode (and allow the | buttons to browse presets) | |
| simply press the Select/Mode button. |
| |
23
